FAQ

Please find our most common asked questions. If you cant find the answer your looking for please contact us through our contact form and we will try and respond within 24 hours

Yes, Wax is dead ceramic coatings should be thought of as adding another clear coat to the paint’s surface. This new sacrificial clear coat is glossier, Slicker, chemical resistant, and even harder than the original clear coat. Ultimate & Supreme are a permanent coatings in the same sense that the clear coat on your car is permanent. Eventually the clear coat will wear away over the years and its overall longevity depends on how the coating has been kept maintained over its life span.

Our Products will be dry to touch within 30minutes. and can not get wet for the first 24 hours!Over the next 72 hours our products will continue to become harder and harder until the surface reaches a 9h hardness. it is crucial to avoid washing the vehicle for the first week but make sure any (bird droppings) are removed in this period immediatly.

All exterior surfaces including paint, metal, stainless steel, chrome, gel coat, plastic composites, exhaust and wheels can be treated with Hydra, Supreme, ultimate, Heat.
Glass is formulated specifically for windshields, windscreens, windows, mirrors, and glass headlamps, Bike Visors
Fabric can be used on all interior surfaces including carpet, fabric,Clothing
Skin can be used on leather interiors & Leather Bags
Wrap & PPF will protect your vehicles vinyl wrap or PPF on your vehicle

Our Coatings provide an additional gloss and protection Glass shield over clear coats. The ceramic will bond into the clear coat which helps contaminants slide off easily, which gives them less time to eat into the surface. This Makes any vehicle easyer to clean and maintaine.

Please Refer to our Aftercare Guide Booklet for washing and maintence.  We do not recommend automated or drive through car washes.

Waxing and polishing is now not required once a vehicle has been coated. But a quick detailer after you have washed your vehicle will be fine. We do have some aftercare products for customers if they enjoy cleaning there own vehicles and wish to maintain it themselves

Even if a vehicle is protected from bird dropping using ceramic coatings you should still Remove bird waste as soon as possible. Saturate the dropping with water the wipe off. Avoid scraping.

The vehicle will need to undergo a full paint decontamination wash to remove bugs,grime etc. Once completed depending on how bad the paint of the vehicle is the paint will need to be prept with a paint correction process to removes swirls and scratches prior to applying the coating.

The vehicle will need to undergo a full paint decontamination wash to remove bugs,grime etc. Once completed depending on how bad the paint of the vehicle is the paint will need to be prept with a paint correction process to removes swirls and scratches prior to applying the coating.

Yes our coatings can be applied over any factory decals and will add gloss to your emblems. We also have a dedicated product to help keep vehicle wraps/graphics  looking new and proteced from the elements

Application of our products should be done on a single panel at a time (e.g. Bonnet, Wing, door) ensuring complete coverage and reducing the possibility of letting the product dry too long.

Our products are self levelling. So you just need remove excess product once the flash time has begun

Missed spots can be fixed easily. Just apply more product to the missed area then buff off. our product will level itself with the previously treated surface on its own. 

If you let a spot dry you have two options:
If you applied it in the last hour depending on tempurture , you can reapply to the section then buff it off right away.
If 1 hour has past you will need to machine polish compound the panel and re apply the full panel again.

Yes, Ultra and Heat can be applied using a HVLP spray gun, however Supreme and Ultimate should be applied by hand.

After the coating has cured, it can only be removed by polishing (Heavy compounding) or wet sanding.

Yes Ultimate is a great product for protecting and adding gloss & depth to carbon fibre panels

Yes, the product is safe to apply to car, trucks, and motorcycle mufflers and pipes. Our products withstands temperatures over 1000 degrees

Protective latex gloves should be worn at all times
A respirator is recommended for applications in closed or poorly ventilated areas.

While Our products are easy to apply, attention must be paid to follow proper directions.  Prepping the vehicle and wiping down the evaporated surface within the specified time frame. Always test an inconspicuous area first.